JPK

The JPK circular radial diffuser features a perforated sheet cylinder including a spigot, a closed base plate, and an internal height-adjustable control cone.

The diffuser’s design enables air directions ranging from diagonally upwards to vertically downwards. The umbrella-shaped radial air discharge ensures draughtfree ventilation of large room areas, in particular in cooling mode, even with large air flows and temperature differences.

The distribution pattern is adjusted by moving the control cone manually, by bowden cable or by electric motor.

Air enters the control cone through the spigot. Depending on the control cone’s position, it produces either vertical air discharge (“up” position) or radial air discharge with a diagonally upward axis (“down” position). Between these end positions, the distribution pattern can be infinitely varied by continuously adjusting the cone.

• Made of galvanised steel.
• Standard colour:
  • Non-painted
• Alternative standard colours:
  • RAL 9010, pure white, gloss 70
  • RAL 9003, signal white, gloss 70
  • RAL 9006, white aluminium, gloss 70
  • RAL 9005, jet black, gloss 70
  • RAL 7035, light grey, gloss 70

• Other colours available on request.
• Available in stainless steel or aluminium on request.

Circular radial diffuser JPK for large air flows with the following features:

• Perforated sheet cylinder including a spigot, closed base plate and an internal height-adjustable control cone.
• Horizontal or vertical distribution pattern.
• Control cone can be adjusted manually or by motor:
  • Manually by locking device
  • Manually by bowden cable
  • Electric motor
• Made of galvanised steel.
• Special colours available on request.