PACIFIC HC

The casing is manufactured in galvanized sheet steel (zinc plated) The face plate is in prepainted sheet steel and aluminium RAL 9003, Coil in copper and aluminium.

Standard colour:

• RAL 9003 White (Signal white), gloss ratio 30 ± 6%

Alternative standard colours:

• RAL 7037 Grey (Dusty gray), gloss ratio 30-40%)
• RAL 9010 White (Pure white), gloss ratio 30-40%)
• RAL 9005 Black (Jet black), gloss ratio 30-40%)
• RAL 9006 Silver (White aluminium), gloss ratio 70-80%)
• RAL 9007 Grey (Grey aluminium), gloss ratio 70-80%)
• Other colours available on request

Installation

The PACIFIC HC is supplied with four mounting brackets and self-tapping screws packaged separately and supplied with each unit. The mounting brackets can be located at any position along the entire long side of the unit for maximum adjustability. The pre-punched holes in each mounting bracket simplify the fastening work. The mounting brackets are designed to be turned in any optional direction depending on the type of suspension system selected. Turned inward, the mounting brackets offer simple installation by means of mounting strips. Turned outward, the mounting brackets work at their best for suspending the beams by means of threaded rods. Threaded rods must be ordered separately and are available in a variety of lengths. Mounting strips are by others.

Connection dimensions

Cooling (water): 1/2" NPT threaded Heating (water): 1/2" NPT threaded Air: Insertion joint, 125, 150 or 200 in nominal diameter