REACT Paragon Wall

REACT Paragon Wall is a comfort module designed primarily for hotels and hospital wards, where high demands are placed on comfort, low sound levels and discreet installation.

Thanks to an optimised cooling/heating coil, REACT Paragon Wall delivers high cooling and heating capacity even at low airflows and pressure drops. The compact design minimizes space requirements and is ideal for installation at the rear edge of the room.

On the rear of the product, the supply airflow is adjusted by the motorized Flow Control. The control also indicates the product’s current k-factor, simplifying commissioning and verification of the set airflow.

Lightweight and service-friendly REACT Paragon Wall has all control components and service points located on the rear of the product. This enables easy access, for example from a corridor, so that service can be carried out without entering the room.

Quiet and efficient

• High induction ensures excellent air quality and comfort.
• Low pressure drop reduces fan energy.
• Quiet operation suitable for noise-sensitive environments.

Sustainable by default

• The product contains steel with at least 75% recycled material.

Sizes and variants The product is available in three lengths: 800, 1100 and 1400 mm.

All sizes can be ordered with the water connection on the left or right short side, providing high installation flexibility.

Adjustable supply and return air grille The adjustable supply and return air grille ensures a clean, well-fitted transition to the wall. The grille has an adjustment range of ±20 mm and is easily secured with screws for stable and safe installation.

REACT Paragon Wall features an integrated actuator for airflow adjustment and is easy to integrate into external building management systems.

This ensures:

• Optimal comfort in every room or zone.
• Lower energy use.
• Flexible integration with BMS and room control systems.
• Future-proof and flexible operation.

Flow Control REACT Paragon Wall has an integrated damper and actuator that continuously regulate the airflow and ensure the correct air volume. The control is pressure-independent and automatically compensates for pressure variations in the duct system.

Because the airflow is regulated internally in the product rather than by a traditional damper installed upstream, the available driving pressure is maintained.

This means that the product’s air induction, cooling and heating capacity, and other functions are not adversely affected by pressure losses across an external damper.

Anti-Draught Control (ADC) Anti Draught Control (ADC) makes it possible to direct and distribute the supply air to reduce the risk of draughts in the occupied zone.

REACT Paragon Wall is equipped with both horizontal and vertical ADC fins, providing great flexibility to adapt the air distribution pattern to the room layout and current conditions.

REACT Paragon is manufactured from recycled and renewably produced galvanized sheet steel (zinc plated).

• The grille can be ordered in several colours.

Standard colour:

• RAL 9003 (Signal white), gloss ratio 30%

Alternative standard colours:

• RAL 7037 (Dusty gray), gloss ratio 30%
• RAL 9010 (Pure white), gloss ratio 30%
• RAL 9005 (Jet black), gloss ratio 30%
• RAL 9006 (White aluminium), gloss ratio 70%
• RAL 9007 (Grey aluminium), gloss ratio 70%

REACT Paragon Wall is supplied with four mounting brackets and self-tapping screws packaged separately with each product. The pre-punched holes in the brackets simplify fastening.

The mounting brackets are designed so they can be turned in any direction depending on the selected suspension system. Turned inward, they enable simple installation using mounting strips. Turned outward, they are optimised for suspension using M8 threaded rods.

Mounting strips and threaded rods are not supplied. Threaded rod/assembly fitting SYST MS M8 is ordered separately.

Example specification text according to VVS AMA. PCT.312 Duct-connected chilled beams. PTD.4 Duct-connected room units for heating and cooling.

KB XX REACT Paragon Wall comfort module with integrated supply air damper. Designed for rear-edge installation in ceiling/wall with the following functions:

• Waterborne cooling.
• Waterborne heating or electric heating.
• Ventilation.
• ADC comfort function with adjustable setting ±30 degrees.
• Duct connection Ø125 mm.
• Integrated recirculation air opening in the lower section.
• Coil and any control equipment accessible from the rear of the product or via the return air grille.
• Cleanable.
• Fixed measuring point with hose.
• Eurovent certified.
• Grille in standard colour RAL 9003.
• Pressure-independent airflow control
• Easy connection to BMS, 0–10 V DC, Modbus RTU or BACnet MS/TP.