ProAir web
Update notes:
ProAir web 2006.10, updated 12/10/2006
The following changes and corrections have been done:
- Data adjustments
- Pictures of Colibri have been added
ProAir web 2006.9, updated 15/09/2006
The following changes and corrections have been done:
- Changed descriptions and updated data for ICP, IHC, IVC and CDY.
- Drawing dimensions for ICP and IVC updated.
- Changed to "Lp dB(A)" in all product diagrams.
ProAir web 2006.8, updated 30/08/2006
The following changes and corrections have been done:
- Maximum cooling capacity changed from 99999 W to 9999999 W.
- Changed dimension data for LPA and sizes 160 and 400 has been added.
ProAir web 2006.6, updated 14/06/2006
The following changes and corrections have been done:
- Air flow direction turned 90 degrees for 2-way SRY.
- EXC diagram changed
- Exhaust air diffusers are transferred from MagiCAD to be able to calculate the correct sound levels.
ProAir web 2006.4, updated 12/05/2006
The following changes and corrections have been done:
- ”Checks to be made”, i.e. sound level, air velocity etc. is moved from the ”Automatic device selection” window to the ”Room description” window. It is now easier to change the check values when placing devices manually.
- Instead of max limits for airflow and cooling effect in the “Ventilation” window, there is now a warning if the calculation is unreliable.
- Favourites are removed from the “Device position” window.
- To calculate the total sound level, the exhaust devices will also be transferred from MagiCAD to ProAir web. NOTE that exhaust devices are not shown in ProAir web.
- Room dimensions are not automatically set to default if you first have placed any device and want to change type of room in the “Room description” window.
- When placing wall devices with ”Automatic device selection” it is possible to choose on which walls the devices should be placed.
- There are now explanations to the blue and red line in the engineering graph under “Properties”.
- Data in engineering graphs under “Properties” are given with the same room attenuation as in Swegon’s catalogue sheets.
- On the printout, the sound level is given only at chosen damper positions. The text is also made clearer.
- Type of room is shown on the printout.
- The sound level is calculated at 1,1 meter above the floor (1,8 m before).
- Sound level for displacement units is calculated at a minimum distance of one meter from the loudest device when air flow is 70 l/s or less, otherwise at a minimum distance of two meters from loudest device.
- Shown air velocity in effected area has been corrected.
- Isovel picture for Condor has been corrected.
For more information se users manual.
ProAir web, version 2006.3, updated 09/03/2006
The following changes and corrections have been done
- The new LOCKZONE Ceiling has been added as supply air diffuser with "rotation spread" and as exhaust device. Note that LOCKZONE Ceiling also is available as low version.
- The BOCa supply air terminal has been added. To run simulations in heating mode choose "Mixed" in the "Room description" window. The BOC is then available as a "Vertical ceiling device". Place the BOC at the right height with the "Positioning" feature. To run simulations in cooling mode choose "Displacement" in the "Room description" window. The BOC is then available as a low velocity terminal with "Circular spread". Place the BOC at the right height with the "Positioning" feature.