Water-based Indoor Climate Systems, 2007
www.swegon.comHDA
®Lightstrips
Ceiling system for heating and cooling
LIGHTSTRIPS
- LIGHTSTRIPS ultra light weight prefabricated ceiling panel for cooling and heating.
- LIGHTSTRIPS can be suspended or integrated in a suspended ceiling.
- Several widths that can be connected in series in lengths up to 25 metres..
- Hygienic– enclosed insulation.
FUNCTIONS
- Heating (by radiation)
- Cooling (by radiation)
APPLICATION
- Halls
- Industries
- Schools
- Shops
- Offices
KEY FIGURES
| |
Cooling capacity: | Up to 90 W/m |
Lengths: | Lengths up to 6000 mm. Connected in series up to 25 m. |
Width: | Widths 400 mm, 800 mm and 1200 mm. |
Colour: | Swegon standard white finish RAL 9010. On delivery surfaces are protected by plastic film. |
Control: | Per room or centrally. Swegon Control system, see separate brochure. |
ADVANTAGES OF LIGHTSTRIPS HDA
LIGHTSTRIPS – serves several functions:- heating and/or cooling to the required temperature.
- can be individually suspended or integrated in a suspended ceiling.
- installed in long lengths to minimise connection pipes.
LIGHTSTRIPS are supplied as complete units with heating/ cooling capacity adapted to the customer’s requirements.
Low installation costs:- light design.
- prefabricated units.
Inset depth is minimal – only 30 mm when surface mounted on the ceiling. Low maintenance costs due to:- no moving parts.
- smooth surfaces on the top and bottom that are easy to clean.
Hygienic due to:- enclosed insulation.
- easy to wipe clean.
As temperature control is designed using a system with water as the heat transfer medium the ventilation system can be fully adapted to the activities carried out in the building.
FUNCTION
Hot or cold water circulates through copper pipes that have homogenous contact with a profiled aluminium plate. The panel absorbs or gives off heat through radiant heat exchange between the panel and the room. The exchange of heat takes place primarily through radiation.
DESIGN
The panels are manufactured of flat aluminium plate with profiled seatings for the copper pipe. The panels are 400mm wide and can be supplied interconnected using two or three panels for widths of 800 or 1200 mm. Piping is designed in copper, Ø 12 mm and is applied so that maximum contact between the pipe and panel is achieved.
Suspension fittings are made up of surface treated steel components.
PERFORMANCE AND TECHNICAL DATA
For detailed information, visit www.swegon.com.
Figure 1. Series connection.
Lightstrips are manufactured in ready made sections in lengths up to 6 metres. The required length is obtained by combining different lengths in increments of 500 mm up to an overall length of 25 metres.
Table 1. Weight per metre
|
Width (mm) | Weight incl. water (kg/m) |
400 | 2,5 |
800 | 5 |
1200 | 7,5 |
|
We reserve the right to change the technical specification.